Compliance Testing and Service

Testing for Stage I and Stage II Vapor Recovery for Gasoline Dispensing Systems.

• Static leak test required annually on stage II systems.
• A/L (Air to Liquid ratio nozzle test) required annually.
• Blockage test-required every five years and whenever dispensers are changed.
• Static leak test – Stage I systems required every three years beginning January 2011 on high volume sites.

We make all required repairs to stage I and stage II systems.  Many times we can complete repairs during a test with an EPA inspector present saving time, cost, and shutdown time.  We can use helium leak location to find leak efficiently. 

• A precision line test is required annually on many systems.
• Our testers all have current certification on the testing equipment we use.
• Leak detector testing is required annually on all pressurized piping systems.

We can diagnose any test failures and make all required repairs to the system.

• Cathodic Protection Systems on steel tanks and lines must be tested every three years for proper operation.  This includes STI – P3 tanks, impressed current systems, and sacrificial anodes on piping.
• Our technicians can perform these tests, diagnose any problems, and make required repairs.

• Sumps at tanks and at dispensers for systems installed since 2005, and many systems in designated sensitive areas must be tested every three years.
• When we perform these tests we and we will filter and recycle the water used for testing so no water disposal is needed.
• We use cost effective materials to repair leaks in sumps including Weaver boots and PTI paste.

• Our technicians can inspect your site, identify any compliance issues, and make required repairs and modifications to help you avoid citations from state inspectors for any non compliance issue.

• Automatic tank gauges and electronic line leak detectors can only protect you from leaks if all of the probes, sensors, and alarms are in good working order.
• Our technicians can test all your systems per PEI RP 900 – “Recommended Practices for the Inspection and Maintenance of UST Systems” and insure that your site is protected against possible leaks or spills.
• We can diagnose and repair any problems we discover to insure your systems are working properly.

• We test your mechanical or electronic overfill protection devices to be sure they are in good working order. 
• We can make any repairs needed.
• This can help you avoid a costly spill resulting from a failure of overfill devices.

View Our Brochures (PDF Format)

Compliance Testing & Service	About Reliable Construction

Contact us at: 937-461-2250